|
Product Details:
Payment & Shipping Terms:
|
| Nominal Force Of Cylinder: | 1000KN | Center Height: | 100mm |
|---|---|---|---|
| Rated Pressure: | 20Mpa | Power: | 4000W |
| Rated Flow: | 5ml/r | ||
| High Light: | 100T Portable Line Boring Machine,100T hydraulic track pin press,5ml/r Portable Line Boring Machine |
||
XDEM 100T Portable Track Pin Press, Hydraulic Master Pin Press for Bulldozer, Excavator
Portable Track Pin Press 100T
PRODUCT DESCRIPTION
Hydraulic track pin press is used for press fitting and repair of the traveling mechanism of construction machinery. Hydraulic track press manufactured by our company is suitable for the assembly and dis-assembly of link chains and shaft sleeves for various crawler construction machinery and equipment. It is an essential equipment for construction machinery maintenance companies.
The portable track link pin press adopts a bidirectional hydraulic device, reducing oil circuit, easy to maintain and repair. It is lightweight, not only suitable for in-plant use but also anywhere on the site, field operations. This device has two models for choice: electric and manual for which users can choose according to their actual situation.
WORKING PRINCIPLE
The track link pin press is a special tool by utilizing the conversion from hydraulic energy into mechanical energy to dis-assembly the track pin of a crawler excavator. Manual, electrical or manual and electrical pump is used as a power source to move the hydraulic jack forward so that the pin can be removed smoothly. Instead of gas cutting and hammering, it ensures that the track is intact. It is an ideal special tool for track excavator maintenance and assembly.
Hydraulic system of electrically driven track press: hydraulic system (pump station) is installed on the right side of the host. The entire hydraulic control system drives the high-pressure pump to input the pressure oil through the motor. After the solenoid reversing valve, the oil is respectively input to enable the cylinder plunger to reciprocate up and down. In the neutral position, the system is unloaded and the oil flow goes into the tank. The press is electro-hydraulic controlled. Extra hand pump can be equipped for field operation without power supply.
| 1 | Nominal force of oil cylinder | KN | 1000 |
| 2 | Press stroke | mm | 180 |
| 3 | Rated pressure | MPA | 20 |
| 4 | Center height | mm | 100 |
| 5 | Motor power | KW | 4 |
| 6 | Rated flow | ml/r | 5 |
200T TRACK PIN PRESS MAIN PARAMETERS
PRODUCT PICTURE
Standard Parts Included:
| 1 | Pressure chain machine host | 1 set |
| 2 | Flashlight dual-use pump station | 1 set |
| 3 | Tubing | 2 pcs |
| 4 | Pressure gauge | 1 pcs |
| 5 | Seals | 1 set |
| 6 | Increase pressure bar | 2 pcs |
| 7 | Pressure plate | 1 pcs |
| 8 | Positioning plate | 1 pcs |
| 9 | Chain positioning pin | 1 pcs |
| 10 | Dismantling tooling | 6 pcs |
| 11 | Instruction Certificate | 1 pcs |
Note:
1. Dismantling tooling includes:
Forcng pin: Φ70x150mm&Φ70x100mm;
Guide pin:
For excavators<32T: Φ25x180mm&Φ28x180mm&Φ30x180mm&Φ40x180mm;
For 40T
2. Flow of electric pump:5L/min
Pump capacity: 16L (hand pump);32L (electric pump)
Contact Person: Mr. John Fang
Tel: 86-13837786702
